Our tank wagons for pressurised gases allow the transportation of liquified gas with a volume per wagon from 80 m³ (ethylene oxide) to 116 m³ (butadiene).
Additional features such as pressure or temperature sensors or GPS allow the continuous tracking of your transport. We are happy to provide individual advice – of course on a non-binding basis – to help you find the optimal solution for your needs.
Usage:
Transportation of compressed gases / liquified gases (LPG, vinyl chloride, chlorine, ammonia gas, etc.)
Some example offers from our range of vehicles:
4-axled stainless steel tank wagon • Type: Zagns, 81 m³
| Number of axles: | 4 axles |
| Length over buffers: | 15,900 mm |
| Distance between bogie pivots: | 10,860 mm |
| Volume: | 81 m³ |
| Heating system: | No |
| Insulation: | Yes |
| Material: | 1.4318 |
| Tank code: | P15BH |
| Type of dome: | man hole at the front side |
| Filling / discharging: | gas phase DN 80/50 / liquid phase DN 80 |
| Bottom discharge valve: | gas phase DN 80/50 / liquid phase DN 80 |
| Characteristics: | Suitable for the transportation of ethylene oxide, emergency closure of bottom discharge valve accessible from all 4 sides, provision for installment of pressure / temperature sensors and GPS |
4-axled tank wagon • Type: Zags, 116 m³
| Number of axles: | 4 axles |
| Volume: | 116 m³ |
| Heating system: | No |
| Insulation: | No |
| Material: | P355NL2 |
| Tank code: | P15BH |
| Type of dome: | man hole at end |
| Bottom discharge valve: | gas phase DN 80/50 / liquid phase DN 80 |
| Characteristics: | Suitable for the transportation of pressurised gases such as butadiene, sun protection roof |